The Solo Stove Bonfire 2.0 is a wood-burning firepit built from 304 stainless steel. It measures 49.5cm wide and 44.5cm high and weighs 11.4kg. The design uses a patented 360° airflow system with a double wall and bottom vent holes. Air gets pulled in from below and pushed out over the flame, which creates a secondary burn.
This secondary burn cuts down smoke output significantly compared to a standard firepit. Less smoke means less smell clinging to your clothes and hair after a night outdoors. The base plate and ash pan lift out easily, so cleaning up cold ash takes minutes rather than a scrubbing session.
A stand comes included to keep the hot base off grass, decking or patio stone. The gunmetal finish uses a high-heat ceramic coating that holds up better than standard paint. At 11.4kg it's light enough to carry to the garden, a campsite or the beach.
It isn't completely smoke-free but it comes close once the fire gets going. Most customers report smoke during the first 10 to 15 minutes while the fire establishes itself, then it drops right off. A few reviewers noted it still produces some smoke even when warmed up, so results can vary depending on wood type and moisture content. Dry, seasoned wood gives the best results.
It runs on wood only. There's no gas or propane option for this model. Untreated, seasoned firewood works best and gives the cleanest burn thanks to the airflow system.
The firepit weighs 11.4kg, light enough for one adult to lift and carry. It comes with a carry case with handles, which makes it practical to take camping or to the beach as well as using it in the garden.
No. The included stand keeps the base only a few degrees above ground temperature, even after hours of burning with an internal temperature around 400°C. This makes it safe to use on decking, patio stone or grass without scorching.
Once the fire is fully cooled, lift out the removable base plate. The ash pan sits underneath and catches the fine ash. Tip it out and wipe down the plate. Reviewers note this can get hands a bit dirty, especially if rain has made the ash damp overnight.
It measures 49.5cm in depth, 49.5cm in width and 44.5cm in height. This makes it a mid-size option, smaller than the larger 32-inch and 40-inch firepit models but still large enough to seat a group around it comfortably.
This listing is for the Gunmetal finish. Other colour options in the range include Ash, Silver and Water. The ceramic coating is baked on at high heat so the colour holds up better than standard paint under repeated use.
Minimal. There's no complicated build process. You simply position the stand, place the firepit on top and it's ready to load with wood and light. Most customers report setup taking just a couple of minutes.
| Spec | Detail |
|---|---|
| Brand | Solo Stove |
| Model | Bonfire 2.0 |
| Material | 304 stainless steel |
| Colour | Gunmetal |
| Finish type | High-heat ceramic coating |
| Fuel type | Wood |
| Shape | Round |
| Style | Modern |
| Depth | 49.5cm |
| Width | 49.5cm |
| Height | 44.5cm |
| Weight | 11.4kg |
| Unit count | 1 |
| Airflow system | 360° Signature Airflow, double wall design |
| Ash pan | Removable |
| Base plate | Removable |
| Stand included | Yes |
| Carry case included | Yes, with handles |
| Assembly required | Minimal, no tools needed |
| UPC | 850055049413 |
| Manufacturer | Solo Stove |
| Category | Smokeless firepit, wood burning firepit |
| Colour options | Ash, Gunmetal, Silver, Water |
| Recommended clearance | At least 3 feet from flammable materials |
| Star rating | 4.8 |